Sale!

Digital Delay Timer PLC Delay Time Control Switch 0.1Sec to 999Min Adjustable

465.00

Increase the power supply anti-reverse function. Adopt photoelectric isolation input and output to enhance anti-interference ability.
Set the parameters after powering for the memory forever. The signal terminal voltage signal can be kept for a long time. Ensure stability, industrial-grade board, PLC grade.
P1-2 working mode: signal trigger start timing X time to relay pull-in Y disconnect. The user can set the time for the relay to pull in X, Y; the time setting is similar to P1-1. The blue light is on to indicate the time when the relay is closed, and the blue light is off to set the time when the relay is disconnected.
P1-3 working mode: turn on X seconds, disconnect Y seconds, infinite loop. The user can set the time X, Y of the relay pull-in; the time setting is similar to P1-2. Short press K1, you can enter the fine adjustment settings of the function, first, turn on X, turn off Y seconds, press K1, first disconnect X, turn on Y seconds, then press again to repeat the default first setting.
P1-4 working mode: the signal triggers the relay to pull in but does not start timing, the trigger signal disappears and starts timing T. When the time is up, the relay is turned off; during the delay, the signal is given again, the delay is canceled, the suction is kept, and the signal disappears. Restart the timing; (equivalent to the start of the button release, often used for the power-off delay). The user can set the time T for the relay to pull in; the time setting is similar to P1-1.

Category:

Allianztec Automation DC 12V Time Delay Relay Module LED Display Digital Delay Timer PLC Delay Time Control Switch 0.1Sec to 999Min Adjustable

Reviews

There are no reviews yet.

Be the first to review “Digital Delay Timer PLC Delay Time Control Switch 0.1Sec to 999Min Adjustable”

Your email address will not be published.